BITPRUFE  BLE RUBBERISED BITUMEN EMULSION

DESCRIPTION

BITPRUFE BLE is a brown bituminous thixotropic emulsion which dries to a tough black, seamless, flexible waterproof and vapour proof membrane with excellent adhesion to most substrates. 

USES:

Applied for tanking and waterproofing of structures.

Floors: to provide a sandwich membrane during new construction of surface treatment. 3

Wall: for interior and exterior walls

Roofs: for the maintenance of many types of roofs including built up felt, asphalt, lead, zinc, aluminum, concrete, lightweight screeds, timber, slate, asbestos, cement, corrugated iron and also as a vapour barriers. As an adhesive: for bonding woodwork and mosaics, insulation board, expanded polystyrene, cork tiles and to provide a key for plastering. Curing: can also act as a curing agent when applied on fresh concrete.

FEATURES:

Ø COLD APPLIED

Ø SINGLE COMPONENT

Ø ASBESTOS FREE

Ø EASY APPLICATION

Ø EXCELLENT ADHESION TO MOST SUBSTRATES

Ø SEAMLESS / JOINT FREE

 TECHNICAL DATA & STANDARDS

Color	Dark Brown
Specific Gravity	1.0 – 1.1 at 25 0C
Coverage	1.5 to 2m2/litre
Flash Point	Non flammable
Service Temperature	-20 0C to +60 0C
Application Temperature	+5 0C to 55 0C
Rubber Content	10%
Solids Content	65% (ASTM D 244)
Conforms To	ASTM D 2939 & BS 8102

APPLICATION INSTRUCTIONS:

BITPRUFE BLE may be applied by brush or squeeze. All surfaces to which BITPRUFE BLEis to be applied must be sound, stable with an even finish, and free from dirt, dust, loose debris, grease etc. it may be applied to damp but not waterlogged surfaces. Hot, very dry or porous surfaces should be dampened with a priming coat before BITPRUFE BLE is applied. Where subsequent coats are to be applied, the first coat must be dry.

STORAGE

Store under cover, out of direct sunlight and protect from extreme temperatures. Shelf life is upto 12 months when stored as above. Failure to comply with the recommended storage conditions may result in premature deterioration of the product.

PACKING

BITPRUFE BLE is available in 20 ltr. pail & 200 ltr. Drums

HEALTH & SAFETY:

As with all bitumen products caution should always be exercised. Protective clothing such as gloves and goggles should be worn. Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting. Call for medical assistance immediately. Ensure that the container is available for medical attendant to examine any relevant instructions and contents details.          

*MANUFACTURED UNDER LICENSE:

BUILDING CHEMICAL RESEARCH LTD, UK

www.buildingchemicalresearch.co.uk

sales@buildingchemicalresearch.co.uk